Microconnect B-UTP503W Network Cable White 3 m Cat5e U/UTP (UTP)

The Microconnect B-UTP503W is a 3 m Cat5e networking cable with RJ-45 connectors on both ends, designed for reliable wired connections between devices such as switches, modems, routers and wall outlets or patch panels. It supports the Cat5e standard (tested up to 100 MHz) and is backward compatible with Cat5, providing a compact white cable suitable for home and small office networks and entertainment setups.

Advantages

The cable offers U/UTP construction with RJ-45 connectors to ensure stable data transfer up to 1000 Mbit/s in typical Cat5e applications. Latch protection on the connectors reduces the risk of damage during installation in tight spaces. Its 3 m length and white colour make it a practical choice for tidy desktop and wall-mounted installations.

Suitable for

• Connecting a computer, router or switch to a modem or patch panel
• Home and small office network wiring
• Streaming and entertainment devices that require wired Ethernet

Key specifications

• Standard: Cat5e (tested up to 100 MHz)
• Data rate: up to 1000 Mbit/s (typical for Cat5e installations)
• Length: 3 m
• Connectors: RJ-45 to RJ-45
• Shielding: U/UTP
• Colour: White
• Weight: 0.04 kg
• MPN: B-UTP503W, EAN: 5711045838156

How to use

Connect one RJ-45 connector to the network port of your device (router, switch, modem or computer) and the other end to the corresponding port on the destination device, patch panel or wall outlet. Ensure connectors are fully inserted until the latch clicks. Route the cable to avoid sharp bends and protect it from crushing and heat sources to maintain performance.

Recommendations

Use the cable for distances within its 3 m length; for longer runs, choose appropriately rated cabling. Avoid running the cable in parallel with high-voltage power lines to reduce electromagnetic interference. If permanent installation is required in structured cabling, consider using cable types specified for in-wall or plenum use.