Microconnect B-UTP603 Network Cable Grey 3 m Cat6 U/UTP (UTP)

The Microconnect B-UTP603 RJ-45 Cat6 3m Grey is a 3-meter U/UTP networking cable designed for reliable wired connections between devices such as switches, modems, routers or patch panels. Complying with the Cat6 standard, the cable is tested up to 250 MHz and supports data rates up to 10000 Mbit/s. Its RJ-45 connectors on both ends and grey jacket make it suitable for home and small office network installations and entertainment setups.

Advantages

This Cat6 cable offers backward compatibility with Cat5e and Cat5, U/UTP construction to reduce electromagnetic interference, and integrated latch protection on the connectors to prevent damage during installation in tight spaces. The 3 m length provides flexibility for typical desk-to-switch or wall-outlet connections while keeping signal quality within the Cat6 specification.

Suitable for

• Connecting PCs, routers, modems and switches
• Patch panel to network device links
• Home and small office wired LANs
• Entertainment devices and set-top box connections

Key specifications

• Length: 3 m
• Connectors: RJ-45 to RJ-45
• Standard: Cat6, tested up to 250 MHz
• Cabling technology: 10/100/1000Base-T(X)
• Data rate: up to 10000 Mbit/s
• Shielding: U/UTP
• Colour: Grey
• Weight: 0.078 kg

How to use

Connect one RJ-45 end to the network device (router, switch or modem) and the other end to the destination device or wall outlet/patch panel. Ensure the connectors click into place with the latch protection engaged. Route the cable to avoid sharp bends and keep it away from sources of strong electromagnetic interference for optimal performance.

Recommendations

For best results use this Cat6 cable for short to medium runs up to the specified length, avoid excess bending near the connector, and verify that connected equipment supports the required network speeds and standards.