Microconnect B-UTP620O Network Cable Orange 20 m Cat6 U/UTP (UTP)

The Microconnect B-UTP620O RJ-45 Cat6 20m Orange is a 20 metre U/UTP Cat6 network cable with RJ-45 connectors on both ends. It supports data rates up to 10000 Mbit/s and is tested to the Cat6 frequency of 250 MHz. The orange jacket makes the cable easy to identify in installations while the latch protection reduces risk of connector damage during tight installations.

Advantages

This Cat6 cable provides backward compatibility with Cat5e and Cat5 networks while offering reduced interference thanks to its U/UTP construction. The 20 m length covers typical small office and home network runs and the pre-attached RJ-45 plugs allow immediate connection to switches, routers, modems, patch panels or wall outlets. Latch protection on the connectors helps prevent clip breakage during installation in confined spaces.

Suitable for

• Connecting switches, routers or modems to patch panels or wall outlets
• Small office and home network installations
• Entertainment systems and local area network devices

Key specifications

• Standard: Cat6 (tested to 250 MHz)
• Data rate: up to 10000 Mbit/s
• Length: 20 m
• Connectors: RJ-45 to RJ-45
• Shielding: U/UTP
• Colour: Orange
• Weight: 0.386 kg
• MPN: B-UTP620O
• EAN: 5711783216148

How to use

Route the Microconnect Cat6 cable between network devices or to the infrastructure termination point. Insert the RJ-45 connectors into the corresponding ports on switches, routers, modems, patch panels or wall jacks until the latch clicks. Avoid sharp bends and excessive pulling force; secure the cable along its route with appropriate clips or ties to prevent strain on the connectors.

Recommendations

For best performance, keep the cable run length within recommended limits for copper Ethernet, avoid running parallel to high-voltage power lines, and ensure connectors are fully seated. Use the orange jacket to clearly mark network segments during installations.