MicroConnect MC-C19C20LOCK-1.5M-B Power Cable — C19 to C20 Locking, 1.5 m

MicroConnect MC-C19C20LOCK-1.5M-B is a 1.5 m power cable with a standard IEC C19 plug and a locking C20 inlet. It supplies power to servers, UPS units and network devices that use IEC C19/C20 connections and benefits installations where secure, vibration-resistant connections are required.

Advantages

The locking C20 connector prevents accidental disconnection and improves reliability in rack-mounted equipment. With a 1.5 metre length the cable offers a practical reach inside datacenter cabinets and IT closets. The IEC-compatible C19 plug ensures compatibility with a wide range of professional power distribution units and devices.

Suitable for

• Server power connections in data centers
• UPS to equipment connections
• Power distribution units (PDUs) with IEC C20 inlets
• Rack-mounted network and storage equipment

Key specifications

• Cable length: 1.5 m
• Connector A: IEC 60320 C19 (non-locking)
• Connector B: IEC 60320 C20 with locking mechanism
• Intended use: AC power delivery for IT equipment
• Typical mounting: datacenter racks and professional IT installations

How to use

Insert the IEC C19 plug into the device or PDU outlet and align the locking C20 connector with the inlet. Push the locking C20 connector fully into the inlet until the locking mechanism engages to secure the connection. To detach, release the lock mechanism according to the connector design and withdraw the cable. Inspect connectors for damage before use and ensure the cable rating matches system power requirements.

Recommendations

Use this cable in equipment racks and power distribution setups where accidental unplugging must be avoided. Avoid excessive bending near connectors, keep clear of sharp edges, and verify that the cable's current and voltage rating match the connected devices.