Microconnect MC-UTP6A01 Network Cable Grey 1 m Cat6a U/UTP (UTP)

The MicroConnect CAT6a Patch Cable (MC-UTP6A01) is a 1 m grey networking cable engineered for high-speed data transfer up to 10000 Mbit/s and frequencies up to 500 MHz. It uses U/UTP construction and gold-plated 50µ" RJ45 connectors to ensure stable contact. The cable includes latch protection to reduce the risk of clip damage and has meter markings on the boot for quick length identification.

Advantages

This Cat6a cable supports 10Gbit Ethernet and higher bandwidths required in demanding environments. Gold-plated 50µ" RJ45 connectors provide improved conductivity and corrosion resistance, while the U/UTP design maintains signal integrity. Latch protection prolongs connector life and meter markings simplify installation and cable management.

Suitable for

• 10Gbit Ethernet connections in server rooms and data centers
• High-bandwidth LAN applications for offices
• Home networks requiring reliable, fast wired connections
• Structured cabling where 1 m patch leads are needed

Key specifications

• Length: 1 m
• Data rate: 10000 Mbit/s (10Gbit)
• Frequency: up to 500 MHz
• Shielding: U/UTP
• Connectors: RJ-45 to RJ-45, gold-plated, 50µ"
• Color: Grey
• Weight: 0.04 kg

How to use

Connect one RJ-45 connector to your network device (switch, router, NIC) and the other to the corresponding port. Ensure connectors click into place with the latch protection engaged. Use the meter markings on the boot to confirm cable length during installation and route the cable to avoid tight bends or crushing that could impair performance.

Recommendations

For optimal performance, use this Cat6a cable for short patch runs within racks or between nearby equipment; avoid running it parallel and in close proximity to high-voltage power cables to minimize interference.