Microconnect MC-UTP6A02W Network Cable White 2 m Cat6a U/UTP (UTP)

The MicroConnect MC-UTP6A02W is a 2 m Cat6a networking cable with U/UTP construction designed for 10 Gbit/s environments and bandwidths up to 500 MHz. The cable has RJ45 connectors with 50 µin gold plating for improved conductivity, latch protection to reduce clip breakage and meter markings on the boot for quick length identification. Its white finish fits modern installations while delivering stable, high-speed Ethernet connections.

Advantages

This Cat6a cable supports up to 10,000 Mbit/s and is built to maintain signal integrity in demanding network setups. Gold-plated RJ45 connectors and latch protection increase connector reliability, and the meter markings on the boot make cable management and installation faster and more accurate.

Suitable for

• 10G Ethernet connections in offices and data closets
• High-bandwidth applications such as video streaming and large file transfers
• Structured cabling for modern workplaces and home offices

Key specifications

• Standard: Cat6a (U/UTP)
• Length: 2 m
• Data rate: up to 10,000 Mbit/s
• Bandwidth: up to 500 MHz
• Connectors: RJ-45 to RJ-45, gold plated (50 µin)
• Colour: White
• Weight: 0.06 kg

How to use

Connect one RJ45 end to your network device (switch, router or NIC) and the other end to the corresponding port on the connected device. Ensure both connectors are fully inserted until the latch clicks to secure the connection. Use the meter markings on the boot to verify cable length during installation and route the cable to avoid sharp bends or tight bundles that could affect performance.

Recommendations

For optimal performance, avoid running the cable parallel to high-power electrical lines and maintain bend radii above manufacturer-recommended limits. Use the cable for connections where 10G speeds are required or where future-proofing with Cat6a is desired.