Microconnect PE010830 Power Cable Black 3 m CEE7/7 C5 Coupling

The Microconnect PE010830 power cable is a 3 m black mains lead with a Schuko (CEE 7/7) plug and an IEC-60320 C5 coupler. It is designed to connect laptops, power supplies and other compatible electronic devices to mains outlets across many European countries. The cable supports up to 250 V and 2.5 A and has a durable construction for regular use at home or in the office.

Advantages

This power cable combines a widely used Schuko (CEE 7/7) plug with the compact C5 “Mickey Mouse” coupler, providing broad compatibility with European mains sockets and many laptop power bricks. At 3 m length it offers additional reach compared with standard leads, while the black finish helps the cable blend into typical home and office environments. The specified ratings (250 V, 2.5 A) match common requirements for small consumer electronics.

Suitable for

• Connecting laptops and notebook power adapters with IEC C5 inlet
• Powering small electronic devices and chargers that accept C5 coupler
• Home and office setups where a longer (3 m) mains lead is needed

Key specifications

• Connector 1: CEE 7/7 (Schuko)
• Connector 2: IEC-60320 C5 coupler
• Cable length: 3 m
• Input voltage: 250 V
• Input current: 2.5 A
• Colour: Black
• Weight: 0.168 kg

How to use

Plug the CEE 7/7 (Schuko) end into a compatible mains socket. Connect the IEC C5 coupler to the device’s power inlet (commonly found on laptop power supplies). Ensure the cable is fully inserted at both ends and routed to avoid strain or sharp bends. Disconnect by gripping the connector bodies rather than pulling the cable.

Recommendations

Use this cable only with devices and power supplies that accept an IEC C5 inlet and within the specified ratings of 250 V and 2.5 A. Inspect the cable for damage before use and avoid exposure to moisture or excessive heat. Replace the cable if the insulation or connectors are damaged.