Microconnect PE030620 Power Cable Black 2 m C13 Coupling C20 Coupling

The Microconnect PE030620 power cable is a 2 m extension lead with a C13 coupler on one end and a C20 coupler on the other. It is made from H05VV-F cable, rated for up to 230 V and 10 A, and is suitable for connecting devices with a C13 inlet to equipment with a C20 or C19 supply configuration such as PDUs and UPS units. The cable is black and weighs approximately 0.16 kg.

Advantages

This power cable provides a straightforward C13-to-C20 connection with flexible H05VV-F insulation for ease of routing. Its 2 m length offers additional reach without excessive slack, and the 10 A / 230 V rating matches common server-room and office power requirements. The cable’s standardized IEC connectors ensure compatibility with a wide range of equipment.

Suitable for (tasks / use cases)

• Connecting devices with C13 inlets to C20/C19 outlets on PDUs or UPS systems
• Extending reach between power distribution units and equipment in server rooms
• Temporary or permanent power connections in offices and data racks

Key specifications

• Connector 1: C13 coupler
• Connector 2: C20 coupler
• Cable length: 2 m
• Cable type: H05VV-F
• Rated voltage: 230 V
• Rated current: 10 A
• Colour: Black
• Weight: 0.16 kg

How to use

Insert the C13 coupler into the C13 inlet of the device you wish to power, and connect the C20 coupler to the C20 or C19 outlet of the PDU or UPS. Ensure both ends are fully seated and secure before powering the system. Do not exceed the specified 10 A current rating.

Recommendations

Inspect the cable and connectors for damage before each use, avoid sharp bends and exposure to liquids, and use the cable within its rated voltage and current limits. For permanent installations, route the cable to prevent strain on connectors and follow local electrical safety regulations.