Microconnect UTP520W Network Cable White 20 m Cat5e U/UTP (UTP)

The Microconnect UTP520W RJ-45 Cat5e networking cable (20 m) provides a reliable wired connection between network devices such as switches, modems and routers or to structured cabling via patch panels, keystone jacks and wall outlets. Compliant with Cat5e standards and tested up to 100 MHz, this white U/UTP cable supports data rates up to 1000 Mbit/s and is backwards compatible with Cat5.

Advantages

The cable uses U/UTP construction to reduce electromagnetic interference and maintain signal integrity in typical home and small office environments. RJ-45 connectors on both ends and integrated latch protection help prevent connector damage during installation in tight spaces. At 20 m length and 0.446 kg weight, the cable is convenient for most indoor routing needs and blends unobtrusively into white interiors.

Suitable for

• Connecting routers, modems and switches
• Linking devices to patch panels, keystone jacks or wall outlets
• Home networks and small office LANs
• Wired connections for entertainment devices (smart TVs, set-top boxes)

Key specifications

• Brand: MicroConnect
• Model / MPN: UTP520W
• Category: Cat5e U/UTP networking cable
• Length: 20 m
• Connectors: RJ-45 to RJ-45
• Data rate: up to 1000 Mbit/s
• Frequency: tested up to 100 MHz (Cat5e)
• Colour: White
• Weight: 0.446 kg
• EAN: 7331990046475

How to use

Route the cable between network devices or from a device to a patch panel, keystone jack or wall outlet, inserting the RJ-45 connectors into the appropriate ports until the latch clicks. Avoid excessive bending near the connectors and do not pull on the cable jacket when installing through tight conduits. For best performance, keep the cable away from strong sources of electromagnetic interference and avoid running it in parallel with high-voltage power lines.

Recommendations

For stable Gigabit connections within a single room or between adjacent rooms, use the 20 m Microconnect UTP520W as a direct wired link. If you need longer runs or enhanced shielding for electrically noisy environments, consider Cat6 or shielded cable variants.