Microconnect UTP6002 Network Cable Grey 0.2 m Cat6 U/UTP (UTP)

The MicroConnect UTP6002 U/UTP Cat6 0.2 m Grey is a short patch cable for connecting network devices such as switches, modems or routers to each other or to the structured cabling via a patch panel, keystone jack or wall outlet. It supports Cat6 performance up to 250 MHz, is backwards compatible with Cat5e and Cat5, and is intended for small office, home network and entertainment applications where a reliable, low-interference connection is required.

Advantages

This Cat6 cable provides tested performance up to 250 MHz and supports data rates up to 10000 Mbit/s. The U/UTP construction offers basic shielding to reduce interference, and the connector includes latch protection to prevent damage when routing the cable through tight installation spaces. Its 0.2 m length and grey colour make it convenient for short, visible runs in racks or desktop setups.

Suitable for

• Connecting a router to a modem or switch for short runs
• Patching between devices and a patch panel or keystone jack
• Home network and small office connections
• Entertainment setups where short Ethernet links are needed

Key specifications

• Standard: Cat6 (tested up to 250 MHz)
• Type: U/UTP (unshielded twisted pair with overall shielding level)
• Length: 0.2 m
• Data rate: up to 10000 Mbit/s
• Colour: Grey
• MPN: UTP6002
• EAN: 5704327828112

How to use

Connect one RJ45 end of the MicroConnect UTP6002 cable to a networking device (for example a router, modem or switch) and the other end to the target device or to a patch panel, keystone jack or wall outlet. Ensure the latch engages properly to secure the connection. Route the cable without excessive bending or tension to maintain signal integrity and prevent connector stress.

Recommendations

For optimal performance, keep cable runs short when possible, avoid running the cable parallel to mains power lines to reduce interference, and use the cable within environments that match its Cat6 rating. Replace the cable if the latch or connector shows signs of damage.