Microconnect UTP602W Network Cable White 2 m Cat6 U/UTP (UTP)

The Microconnect UTP602W is a 2 m Cat6 UTP networking cable with RJ-45 connectors, designed for reliable wired connections between devices such as switches, modems, routers and patch panels. Rated to the Cat6 standard and tested up to 250 MHz, the cable supports high-speed data transfer and is backwards compatible with Cat5e and Cat5 systems. The white jacket and compact 2 m length make it suitable for home and small office installations and entertainment setups.

Advantages

The cable provides Cat6 performance tested to 250 MHz and supports up to 10000 Mbit/s when used within compatible networks. U/UTP construction ensures predictable signal transmission while RJ-45 connectors offer universal compatibility. The integrated boot (snaggle) protects the connector latch during installation in tight spaces. Lightweight construction and a 2 m length simplify routing and placement in residential and small office environments.

Suitable for

• Connecting routers, modems and switches to patch panels or wall outlets
• Home and small office wired networks
• Media and entertainment devices requiring stable wired connections
• Upgrading existing Cat5e/Cat5 installations to Cat6 performance

Key specifications

• Standard: Cat6, tested up to 250 MHz
• Length: 2 m
• Connector: RJ-45
• Shielding: U/UTP (unshielded twisted pair with overall jacket)
• Maximum data rate (typical, depends on network equipment): up to 10000 Mbit/s
• Colour: White
• Weight: 0.07 kg

How to use

Connect one RJ-45 end of the Microconnect UTP602W to your network device (router, switch, modem) and the other end to a patch panel, keystone jack, wall outlet or directly to another device. Ensure both devices support the intended network speed and that connectors are fully inserted until the latch clicks. Route the cable without sharp bends and avoid running it parallel and close to sources of strong electrical interference to maintain signal integrity.

Recommendations

The cable is intended for indoor use in structured cabling and point-to-point connections; avoid exposure to prolonged UV, moisture or excessive mechanical strain. For best performance, use Cat6-rated patch panels and connectors and keep cable length within recommended distances for Ethernet standards.