Microconnect UTP605 Network Cable Grey 5 m Cat6 U/UTP (UTP)

The MicroConnect UTP605 RJ-45 Cat6 5 m Grey is a 5-meter U/UTP Cat6 networking cable designed for reliable connections between network devices such as switches, modems, routers, patch panels, keystone jacks or wall outlets. It supports data transfer rates up to 10000 Mbit/s and is tested to the Cat6 standard of 250 MHz. The cable is backward compatible with Cat5e and Cat5 and features latch protection on the RJ-45 connectors to reduce the risk of connector damage during installation in tight spaces.

Advantages

This Cat6 cable provides high data throughput and reduced interference thanks to its U/UTP construction, while maintaining compatibility with older Ethernet standards. The 5 m length suits typical desk-to-switch or equipment-to-wall outlet connections, and the grey jacket offers a neutral look for office and home installations. Integrated latch protection helps prevent connector breakage during routing and installation.

Suitable for

• Connecting PCs, routers, modems and switches within home or small office networks
• Patch panel to wall outlet or keystone jack connections
• Entertainment devices such as smart TVs, media players and game consoles
• Environments requiring backward compatibility with Cat5e and Cat5 cabling

Key specifications

• Brand: MicroConnect
• Model / MPN: UTP605
• Type: U/UTP Cat6 Ethernet cable
• Length: 5 m
• Connectors: RJ-45 — both ends
• Test frequency: up to 250 MHz (Cat6)
• Maximum data rate: up to 10000 Mbit/s
• Color: Grey
• Weight: 0.15 kg
• EAN: 7331990041975

How to use

Route the cable between the two network endpoints and plug the RJ-45 connectors into the corresponding ports on your devices or infrastructure components. Ensure connectors are fully inserted until the latch clicks. When installing through confined spaces, feed the cable carefully to avoid bending or stressing the connector; the built-in latch protection reduces the chance of damage but careful handling is still recommended.

Recommendations

For optimal performance, keep cable runs within recommended lengths for your network equipment, avoid running the cable parallel and close to high-voltage power lines to reduce interference, and test the connection after installation to verify link speed and stability.