Microconnect UTP605Y Network Cable Yellow 5 m Cat6 U/UTP (UTP)

Microconnect UTP605Y RJ-45 Cat6 5 m Yellow is a Cat6 U/UTP networking cable designed for reliable connections between network devices such as switches, modems, routers or between a device and infrastructure elements like patch panels, keystone jacks or wall outlets. The 5 m cable supports Cat6 testing up to 250 MHz and offers data transfer rates up to 10000 Mbit/s. Both ends have RJ-45 connectors and the cable is supplied with strain-relief boots (snaggles) to protect the connector during installation. The yellow jacket makes the cable easy to identify in installations.

Advantages

The cable provides Cat6 performance with backwards compatibility to Cat5e and Cat5 and U/UTP shielding that reduces external interference. Pre-fitted boots protect the RJ-45 connectors when routing the cable through tight spaces. A 5 m length covers typical link distances in small office and home network and entertainment setups while maintaining a compact, lightweight form factor.

Suitable for

• Connecting switches, routers or modems to patch panels or wall outlets
• Small office and home network cabling
• Ethernet connections for media players, smart TVs and gaming consoles
• Temporary or permanent patching in structured cabling racks

Key specifications

• Standard: Cat6 (tested up to 250 MHz)
• Shielding: U/UTP
• Maximum data rate: 10000 Mbit/s
• Length: 5 m
• Connectors: RJ-45 – RJ-45
• Colour: Yellow
• Weight: 0.1 kg
• MPN: UTP605Y, EAN: 7331990042040

How to use

Plug one RJ-45 connector into the network device (for example switch, router or modem) and the other into the target port such as a patch panel, keystone jack or wall outlet. Ensure connectors click into place and avoid sharp bends or stretching of the cable. Route the cable using cable ties or trunking where necessary to keep the installation tidy and to prevent mechanical strain on the connectors and jacket.

Recommendations

Use the Microconnect Cat6 cable for short to medium Ethernet links in home and small office environments. For maximum signal integrity, avoid running the cable parallel to high-voltage power lines and maintain bend radii recommended for Ethernet cabling; replace the cable if you notice damage to the jacket or connectors.