Microconnect UTP610B Network Cable Blue 10 m Cat6 U/UTP (UTP)

The Microconnect UTP610B is a blue Cat6 UTP networking cable, 10 m long, with RJ-45 connectors on both ends. It supports data rates up to 10000 Mbit/s and meets Cat6 specifications with testing up to 250 MHz. The cable uses U/UTP construction to reduce interference and includes connector boots to protect the latch during installation in tight spaces. It is backwards compatible with Cat5e and Cat5 systems and is suitable for linking switches, modems, routers or terminating to patch panels, keystone jacks and wall outlets.

Advantages

The cable provides Cat6-level performance tested to 250 MHz and supports high-speed data transfer up to 10000 Mbit/s. U/UTP construction reduces electromagnetic interference while standard RJ-45 connectors ensure wide compatibility. Built-in boots protect the connector latch during installation, and backward compatibility with Cat5e/Cat5 makes it usable in existing networks.

Suitable for

• Connecting switches, routers and modems
• Patch panel, keystone jack or wall outlet termination
• Small office and home networks
• Networked entertainment devices (smart TVs, game consoles)

Key specifications

• Manufacturer: MicroConnect
• Model / MPN: UTP610B
• Length: 10 m
• Category: Cat6 (tested to 250 MHz)
• Maximum data rate: up to 10000 Mbit/s
• Connectors: RJ-45 — both ends
• Shielding: U/UTP (unshielded twisted pair with overall unshielded)
• Color: Blue
• Weight: 0.252 kg
• EAN: 7331990042149

How to use

Connect one RJ-45 end to your network device (switch, router or modem) and the other end to the destination device or to a structured cabling outlet such as a patch panel, keystone jack or wall socket. Ensure connectors are fully inserted until the latch clicks. Route the cable without sharp bends and avoid running it parallel to power cables for long distances to reduce interference. When installing through tight spaces use the integrated boot to protect the connector latch.

Recommendations

For optimal performance, keep cable runs within recommended maximum lengths for Ethernet (typically 100 m for Cat6 in structured cabling). Avoid tight bends and excessive pulling force during installation; test the installed link with a network tester if precise verification of Cat6 performance is required.