Microconnect UTP615O Network Cable Orange 15 m Cat6 U/UTP (UTP)

The Microconnect UTP615O is a 15 m Cat6 UTP networking cable with RJ-45 connectors, designed for reliable high-speed data transfer up to 10000 Mbit/s. It follows Cat6 standards and is tested to 250 MHz, offering backward compatibility with Cat5e and Cat5. The cable's U/UTP construction reduces interference and the orange outer sheath provides clear visual identification in installations. A molded boot (snaggle) on the connector protects the latch during installation in tight spaces.

Advantages

The cable supports Cat6 performance up to 250 MHz and is backward compatible with previous Ethernet categories, enabling versatile use in existing networks. RJ-45 connectors at both ends ensure straightforward plug-and-play connectivity. The U/UTP design reduces electromagnetic interference, improving signal integrity for data and entertainment applications. The molded boot protects the connector latch from damage during routing and installation, and the 15 m length covers longer runs without intermediate patching.

Suitable for

• Connecting switches, routers or modems to network outlets or patch panels
• Home and small office wired Ethernet and entertainment setups
• Structured cabling runs where 15 m reach is required

Key specifications

• Brand: MicroConnect
• Model: UTP615O
• Category: Cat6 (tested to 250 MHz)
• Length: 15 m
• Connectors: RJ-45 — RJ-45
• Max data rate: 10000 Mbit/s
• Shielding: U/UTP
• Color: Orange
• Weight: 0.56 kg
• MPN: UTP615O
• EAN: 5705965922880

How to use

Plug one RJ-45 connector into the network device (switch, router or modem) and the other into the target outlet, patch panel or device. Ensure connectors are fully seated until the latch clicks. Route the cable without sharp bends or excessive tension to preserve performance; avoid running parallel to high-voltage power cables to limit interference. For permanent installations, use appropriate cable management and strain relief.

Recommendations

Use the Microconnect UTP615O for indoor structured cabling and device interconnects where Cat6 performance is required. Maintain bends with a radius larger than the cable diameter and avoid mechanical stress on the molded boot to ensure long-term reliability.