Microconnect V-UTP602S-FLAT Network Cable Black 2 m Cat6 U/UTP (UTP)

Microconnect V-UTP602S-FLAT RJ-45 Cat6 2 m Black is a flat Cat6 U/UTP networking cable with RJ-45 connectors on both ends and a length of 2 m. The cable supports Cat6 performance up to 250 MHz and is backward compatible with Cat5e and Cat5. Its flat profile is intended for installations in confined spaces such as IT racks, cabinets, behind skirting boards or under carpets, and the black colour provides a discreet appearance.

Advantages

The flat design reduces space usage and simplifies routing along walls, under floor coverings or inside narrow cable channels. Tested to Cat6 frequencies (up to 250 MHz), the cable supports high-speed data transfer and is compatible with older Cat5e and Cat5 equipment. Both ends feature standard RJ-45 connectors, and the connector housing includes a protective snoggle to reduce the risk of damage during tight installations.

Suitable for

• Wiring in IT racks and server cabinets with limited space
• Running cables behind skirting boards or under carpets and floor coverings
• Home and office network connections requiring Cat6 performance

Key specifications

• Standard: Cat6 (tested up to 250 MHz)
• Shielding: U/UTP (unshielded twisted pairs, overall foil not present)
• Connectors: RJ-45 to RJ-45
• Maximum supported speed (manufacturer rating): up to 10000 Mbit/s
• Length: 2 m
• Colour: Black
• Weight: 0.03 kg
• Manufacturer part number (MPN): V-UTP602S-FLAT
• EAN: 5704327885566

How to use

Route the flat cable along the desired path, pressing it into narrow gaps, under skirting boards or beneath floor coverings as needed. Insert the RJ-45 connectors into compatible ports on network equipment such as switches, routers or network interface cards. Ensure the cable is not excessively bent or pinched at sharp angles to maintain signal performance and avoid mechanical damage to the conductors and connector snoggle.

Recommendations

For best results, avoid tight bends with a radius smaller than approximately 25 mm and protect the cable from heavy foot traffic or crushing when placed under flooring. Confirm that connected equipment supports the intended network speed and test the link after installation if maximum Cat6 performance is required.