Microconnect XLRMF5 Audio Cable 5 m XLR (3-pin) Black

The Microconnect XLRMF5 5 m is a balanced audio cable with a 3-pin XLR male connector on one end and a 3-pin XLR female connector on the other. Designed for professional audio signal transmission, this 5-metre black cable provides a stable connection between microphones, mixers, preamps and other XLR-equipped devices. Its construction focuses on preserving audio fidelity and reducing interference over medium distances in stage, studio and live sound setups.

Advantages

The cable offers reliable balanced signal transfer thanks to standard 3-pin XLR connectors, minimizing noise and hum in professional audio chains. Its 5 m length gives flexibility for positioning microphones and equipment without excessive cable slack. The black outer jacket provides a discreet appearance suitable for stage and studio environments while the cable’s weight and build are aimed at practical handling and durability during frequent use.

Suitable for

• Connecting microphones to mixers or preamplifiers
• Linking outboard gear with XLR inputs and outputs
• Stage and live-sound setups where a 5 m balanced connection is required
• Studio recording sessions and rehearsal rooms

Key specifications

• Cable length: 5 m
• Connectors: 3-pin XLR male to 3-pin XLR female
• Colour: Black
• Weight: 0.27 kg
• Cable type: Balanced audio cable for professional use

How to use

Connect the 3-pin XLR male connector to the corresponding female input on the mixing desk, preamplifier or microphone, and plug the 3-pin XLR female connector into the corresponding male output on the other device. Ensure connectors are fully seated and locked where applicable. Route the cable to avoid sharp bends, excessive tension and sources of electrical interference. For live settings, secure the cable along stage edges or under gaffer tape to prevent trip hazards.

Recommendations

For best performance, use the Microconnect XLRMF5 within its 5 m length for balanced connections; avoid running the cable parallel and close to power lines or dimmer packs. Inspect connectors periodically for dirt or wear, and replace the cable if shielding or insulation becomes compromised.