Multibrackets M Universal Long Reach Arm 910mm HD, Dual

Mounting Arm MULTIBRACKETS M Universal Long Reach Arm 910mm HD Dual is a full-motion wall mount for single flat panels sized 50"–80". The arm extends from 83 mm to 910 mm and supports up to 60 kg, accommodating VESA patterns from 100x100 to 800x400 mm. Finished in black, the heavy-duty steel construction includes integrated cable management and provides tilt and swivel adjustment for flexible screen positioning in living rooms, meeting rooms or public display environments.

Advantages

The design offers wide extension and articulation with a maximum reach of 910 mm and near-limitless swivel to allow viewing from different angles. Tool-minimal installation and adjustment features enable tilt (-5° to 10°), ±60° swivel and side-to-side sliding for fine horizontal positioning. Robust steel construction supports heavier modern screens up to 60 kg and the integrated cable management keeps connections concealed for a tidy appearance.

Suitable for

When it may not be suitable

This mount is intended for a single display only and is not suitable for multi-screen arrays or very small screens below 50". It requires a wall surface and sufficient structural support to carry the combined weight of the mount and display; it is not suitable for installations where the wall cannot support the specified load.

Key specifications

How to use

Attach the bracket plate to the television using the matching VESA hole pattern and secure the mounting arm to a structurally sound wall following the included instructions. Slide the TV onto the arm assembly and secure the mounting hardware. Adjust tilt and swivel to the desired viewing angle and extend the arm to position the screen at the preferred distance from the wall. Route cables through the integrated cable management channel to keep connections hidden. Finalize by checking all fastenings and verifying the wall fixings are secure for the combined weight.

What to consider before purchase

Recommendations

For safe and durable installation, mount to a load-bearing wall or studs and use appropriate anchors for your wall type. Adjust tilt and swivel while the display is supported to avoid sudden movements, and periodically inspect fixings and joints for security. Use the cable management channel to prevent strain on connections.