Netatmo Smart Carbon Monoxide Alarm

The Netatmo Smart Carbon Monoxide Alarm is a surface-mounted detector designed to monitor carbon monoxide (CO) levels in residential spaces. Compact and unobtrusive at 100 mm × 100 mm × 23 mm, the unit runs on an internal lithium battery and combines continuous CO sensing with audible alerts and smart notifications. Its low-profile housing and straightforward installation make it suitable for placement in living rooms, bedrooms, corridors and near fuel-burning appliances to help detect unsafe concentrations of carbon monoxide.

Advantages

The device offers continuous CO detection with rapid alarm response when elevated levels are present. Battery-powered operation removes the need for hardwiring, while the compact dimensions allow flexible mounting on ceilings or walls. Integrated smart features enable remote notifications and event history, improving awareness of air safety. The alarm produces a clear audible signal for on-site warning and supports straightforward maintenance through battery monitoring and status indicators.

Suitable for

• Residential rooms such as living rooms and bedrooms
• Areas near combustion appliances: boilers, fireplaces, gas stoves
• Hallways and corridors where alarm coverage is needed
• Rental properties and small apartments requiring independent detectors

Key specifications

• Detection target: carbon monoxide (CO)
• Power source: internal lithium battery for autonomous operation
• Dimensions: 100 mm × 100 mm × 23 mm
• Mounting: surface-mounted on wall or ceiling
• Alarm output: audible alarm for on-site alerts and smart notifications for remote alerts
• Sensing: continuous CO monitoring with event logging

How to use

Install the Netatmo Smart Carbon Monoxide Alarm on a wall or ceiling at a recommended distance from fuel-burning appliances and within the breathing zone of occupants. Activate the unit according to the manufacturer’s setup instructions, insert the lithium battery if required, and complete any smart setup to enable remote notifications. Regularly test the audible alarm using the test function and verify that status indicators confirm normal operation. Replace the unit or battery as indicated by the device to maintain detection reliability.

Recommendations

Position the detector on the ceiling or high on a wall in living areas and at least one detector on each level of the home. Avoid placing the unit directly over stoves or immediately adjacent to ventilation openings; keep it away from very humid locations or enclosed cupboards. Perform periodic functional tests and follow local safety guidance on carbon monoxide alarm placement and maintenance.