Network cable Cat6 UTP 1 m black CABLETIME

The Cat6 cable is designed for structured computer networks, IP telephony, and transmission of data and video signals. This 1 m indoor UTP Cat6 cable with RJ45 connectors supports Gigabit Ethernet and is fully compatible with Cat5E network configurations.

Advantages

High-quality Cat6 construction with four unshielded twisted pairs and an internal cross-shaped separator reduces crosstalk and improves signal integrity. Gold-plated copper contacts resist corrosion and provide reliable conductivity. The PVC insulation and polycarbonate RJ45 latch are durable and rated for up to 2000 insertions. The cable follows the TIA/EIA-568B wiring standard for straightforward installation and broad compatibility with computers, servers, IP cameras, switches, routers, set-top boxes, and game consoles.

Key specifications

• Cable type: UTP Cat6 (unshielded)
• Connectors: RJ45 (male), 8-contact, 8P8C
• Data transfer rate: 10/100/1000 Mbps
• Channel bandwidth: 250 MHz
• Internal conductor: CCA (aluminum with copper coating), 26 AWG
• Contacts: copper with gold plating
• Insulation: PVC
• Outer diameter: 6.0 mm
• Cable color: black
• Cable length: 1 m
• Usage: indoor
• Warranty: 12 months
• Wiring standard: TIA/EIA-568B

How to use

Connect the RJ45 plugs to compatible networking devices such as computers, routers, switches, IP cameras or set-top boxes. Ensure the wiring follows the TIA/EIA-568B standard on both ends for correct pairing. Route the cable indoors avoiding sharp bends and excessive tension; the 6.0 mm diameter and PVC insulation are suitable for typical indoor installations. Verify link speed and stability after connection to confirm Gigabit operation where supported.

Recommendations

For best performance, use the cable for indoor network links up to typical Ethernet distances and avoid running parallel to power lines to minimize interference. Replace the cable if the RJ45 latch or contacts are damaged to maintain reliable connections.