Omnidirectional Antenna DeLOCK 12628

The DeLOCK 12628 omni-directional antenna is designed for indoor use to extend and stabilize wireless signals on 2.4 GHz and 5 GHz WLAN bands. With a compact form factor and a male MHF connector, it supports common Wi‑Fi standards including IEEE 802.11a/b/g/n/ac/ax and is intended to improve coverage and connectivity in homes, offices, and other indoor environments.

Advantages

The antenna offers a maximum gain of 4.7 dBi to boost signal strength while maintaining an omni-directional radiation pattern for even coverage. It is compatible with dual-band operation (2400–2500 MHz and 5150–5875 MHz) and has a slim, black design that fits discreetly into various indoor setups. The male MHF connector enables straightforward connection to compatible devices.

Suitable for

• Improving Wi‑Fi coverage in apartments and houses
• Enhancing wireless connectivity in small offices and meeting rooms
• Upgrading routers, access points or wireless modules with an MHF male connector

Key specifications

• Frequency band: 2400–2500 MHz and 5150–5875 MHz
• Maximum antenna gain: 4.7 dBi
• Supported standards: IEEE 802.11a/b/g/n/ac/ax
• Connector: male MHF
• Dimensions: 10 mm (width) × 0.1 mm (depth) × 480 mm (height)
• Colour: Black

How to use

Connect the male MHF connector of the antenna to the corresponding female MHF socket on your router, access point or wireless module. Position the antenna vertically for optimal omni‑directional coverage and place it away from large metal objects and sources of interference. After connection, verify device settings and perform a signal test to confirm improved reception.

Recommendations

For best results, install the antenna in a central indoor location at a moderate height and avoid obstructions. If signal performance is still insufficient, try small adjustments to the antenna position or consider additional antennas for larger spaces.