Patch Cable helos 205587 RJ-45 Plug to Plug, 30 m Length

Patch cable helos 205587 RJ-45 male to male, 30 m length is a copper Ethernet cable designed to provide a stable wired connection between network devices. Intended for use in structured cabling, the cable connects switches, routers, patch panels and end devices over a 30 metre distance. Its RJ-45 male connectors on both ends ensure compatibility with standard Ethernet ports and common network equipment used in offices, server rooms and residential installations.

Advantages

The cable delivers a direct, low-latency copper link suitable for typical Ethernet applications. Its 30 m length reduces the need for intermediate devices where longer runs are required. The RJ-45 male-to-male terminations are compatible with widely used network ports and support straightforward plug-and-play installation. The construction is intended for general indoor networking use, combining flexibility for routing in cable trays or along walls with reliable contact via standard modular connectors.

Suitable for

• Connecting switches and routers within a LAN
• Linking patch panels to network devices in cabinets and racks
• Wired connections for desktop computers, printers and IP devices
• Server room runs where a 30 m copper link is appropriate
• Home network setups requiring a long direct Ethernet cable

Key specifications

• Cable type: copper Ethernet patch cable with RJ-45 male connectors on both ends
• Length: 30 metres
• Connector type: 8P8C modular RJ-45 male
• Usage environment: indoor structured cabling and equipment interconnects
• Typical applications: Ethernet LAN links between networking hardware and devices

How to use

Insert each RJ-45 connector firmly into the Ethernet ports of the devices you want to connect until the retaining clip clicks into place. Route the cable to avoid sharp bends, excessive tension and proximity to strong sources of electromagnetic interference. For patch panel or switch-to-switch connections, use the cable to establish the desired port-to-port link and verify link status via device LEDs or network diagnostics. When disconnecting, press the connector clip and withdraw the plug straight out to avoid damaging the connector or port.

Recommendations

For reliable performance, keep cable runs within recommended indoor routing practices, avoid tight coil storage under load, and ensure connectors remain free of dust and deformation. Use the 30 m length where a single copper run is needed; for longer distances consider using intermediate switches or fiber-based solutions.