PGYTECH PGY battery grip

• About this product

The PGYTech battery grip expands the capabilities of DJI Pocket 3/4 cameras. It combines a more comfortable grip, additional power and a tripod function in a compact design measuring 113 × 34 × 34 mm.

• Additional camera power

The battery provides up to 1.4 additional full charges of the camera. With a fully charged DJI Pocket 3 and grip, the total runtime can reach up to 390 minutes. The grip alone reaches 80% charge in 70 minutes.

• Charging while recording

The battery in the grip replenishes the camera's power without interrupting recording. The upper USB-C port powers the camera directly, so charging can also continue during filming. There is no need to interrupt a shot when the power level starts to drop.

• Battery and cell protection

The BMS protects against over-discharge, excessive voltage, current overload and short circuit, as well as excessively high and low temperatures. The cells are 3C certified and approved for carrying in hand luggage.

• Powering other devices

The rear USB-C port works bidirectionally, supporting both energy input and output. This means the grip can also power a phone or fill light when needed. The USB-C2 port offers output power of up to 18 W, and the upper USB-C1 up to 10 W.

• Specifications
• Model: P-60A-020
• Compatibility: DJI Pocket 3/4
• Materials: Nylon composite, aluminum alloy, silicone
• Dimensions: 113 × 34 × 34 mm
• Weight: 149 g
• Nominal battery capacity: 4800 mAh
• Nominal voltage: 3.65 V
• Number of additional full charges for DJI Pocket 3/4: Up to 1.4
• Runtime: Up to 390 min with a fully charged DJI Pocket 3 and grip
• Grip charging time: Up to 80% in 70 min
• Operating temperature range: 0-40°C
• USB-C1 on top: 5 V / 2 A, max. 10 W
• USB-C2 on rear: 5 V / 3 A, 9 V / 2 A, 12 V / 1.5 A, max. 18 W
• When both ports are used at the same time, the maximum power is 15 W.
• Weight (kg): 0.2