Power cable e+p SW 13 2m C14 coupler CEE7/14

The e+p SW 13 power cable is a 2 m appliance lead with a C14 coupler and a CEE7/14 appliance plug. It is rated for 250 V and 16 A, providing a reliable connection for a range of electrical equipment. The cable is intended for use where a detachable IEC C14 inlet connection is required to connect devices to mains power via a CEE7/14 wall outlet.

Advantages

The cable combines a standardized IEC C14 coupler with a CEE7/14 plug, enabling compatibility with many computers, monitors, printers and other appliances that use a C14 inlet. Its 2 m length offers flexibility in placement while the 16 A/250 V rating supports typical household and light professional equipment. The construction ensures a stable mains connection and straightforward installation.

Suitable for

• Desktop PCs and workstations with IEC C14 inlet
• Monitors, printers and office equipment
• Small servers, UPS units and network devices with C14 sockets
• Home appliances and audio/video equipment using C14 connections

Key specifications

• Brand: e p
• Model / MPN: SW 13
• Length: 2 m
• Coupler (device end): IEC C14
• Plug (mains end): CEE7/14
• Rated voltage: 250 V
• Rated current: 16 A
• EAN: 4005298023669

How to use

Insert the IEC C14 coupler into the matching C14 inlet on the device until it seats securely. Plug the CEE7/14 mains connector into an appropriately rated wall socket. Verify that the device's rated current does not exceed 16 A and that the mains voltage is compatible with the cable's 250 V rating. Ensure connections are made with the power switched off and inspect the cable for damage before each use.

Recommendations

Use the cable only with devices that have an IEC C14 inlet and within the specified 16 A/250 V limits. Avoid routing the cable over sharp edges, hot surfaces or through high-traffic areas to reduce wear. Replace the cable if the insulation or connectors show visible damage.