ProXtend PC-KOE-003 Power Cable – Denmark Plug to Open Ends, 3 m Length

ProXtend PC-KOE-003 is a 3-metre power cord with a Denmark-style plug and open wire ends for custom termination. The cable is designed to provide a mains connection where a specific connector, terminal block or direct hardwiring is required. It is intended for use when equipment must be installed with a permanently attached cable or when a professional needs to fit a device-specific connector on-site.

Advantages

The cord offers a standard Danish plug for compatibility with Type K wall outlets and three metres of flexible cable to reach distant mains sockets. Open end conductors allow technicians to terminate the cable according to the installation needs, enabling a neat and secure connection. Constructed for mains voltage applications, the cable supports fixed wiring and reduces the need for adapters or additional couplers when a custom termination is required.

Suitable for

• Appliances and equipment requiring permanent mains wiring
• Custom installations where on-site connector fitting is needed
• Industrial or workshop devices that use hardwired power leads
• Replacement of damaged fixed cables on compatible equipment

Key specifications

• Plug type: Denmark-style plug compatible with Type K sockets
• Cable length: 3 metres
• End type: open wire ends for custom termination
• Conductor arrangement: multiple core cable suitable for live, neutral and earth connections
• Insulation: mains-rated insulation for safe indoor use
• Intended use: permanent or semi-permanent hardwired connections

How to use

Prepare the device or terminal block for connection by ensuring power is disconnected. Strip the cable ends to the required length, respecting the insulation and conductor markings, and connect live, neutral and earth conductors according to the equipment wiring diagram and local electrical codes. Secure the cable strain relief at the entry point to prevent mechanical stress on the terminations. After wiring, verify continuity and insulation resistance before applying mains power.

Recommendations

Installation and termination should be performed by a qualified electrician or competent person. Confirm that the cable’s conductor size and insulation rating match the appliance and local regulations. Do not use the cable in outdoor exposed locations unless additional protection and appropriate rating are applied.