SATA cable plug/plug DeLOCK 82809 0.5m yellow

The DeLOCK SATA cable (model 82809) is a 0.5 m male-to-male internal cable in yellow, designed to connect SATA devices such as hard drives, controller cards or flash storage inside a computer. It follows the latest SATA standard and provides a visible, easy-to-trace cable for system builds or upgrades.

Advantages

This SATA cable supports data transfer rates up to 6 Gb/s and is backward compatible with earlier SATA versions. Metal clips on the connectors provide additional snap-in security to keep connections stable. The 0.5 m length is suitable for typical internal routing while the yellow color improves visibility within the chassis.

Suitable for

• Connecting internal SATA HDDs and SSDs
• Linking SATA controller cards to drives
• Internal connection of SATA flash storage

Key specifications

• Brand: DELOCK
• Model / MPN: 82809
• Connector: SATA male – SATA male
• Data transfer rate: up to 6 Gb/s (SATA III), backwards compatible
• Cable length: 0.5 m
• Colour: Yellow

How to use

Power off the computer before connecting. Insert each SATA male connector into the corresponding SATA port on the motherboard, controller card or drive until the metal clip engages. Ensure the cable is routed to avoid sharp bends and does not interfere with cooling fans. After installation, power on the system and verify device detection in the BIOS or operating system.

Recommendations

Use the cable for internal connections only. For maximum transfer speeds, pair with SATA III ports and devices. Avoid excessive bending and strain on the connectors; replace the cable if the clip or cable insulation is damaged.