Sharkoon REV300 PC Case Tower White

The Sharkoon REV300 Tower White is an ATX tower case designed for high-performance gaming builds. It features a mesh front panel, a right-side tempered glass window, and seven pre-installed addressable RGB PWM fans to provide strong airflow and visible illumination. The case supports a 90-degree rotated motherboard layout with a top cable compartment and front I/O that includes USB Type-C alongside conventional USB ports.

Advantages

The REV300 combines a large interior with a minimalist exterior, allowing easy installation of large components while highlighting internal lighting through a hinged tempered glass side panel with magnetic closure. Seven pre-installed addressable RGB fans and a full-front mesh grille maximize cooling capability. The case supports multiple radiator configurations and offers dedicated dust filters and ample storage bay options.

Suitable for

• High-performance gaming PCs with large GPUs
• Systems requiring strong airflow and RGB lighting
• Custom air- or water-cooled builds (supports up to 420 mm front radiator)
• Setups needing multiple internal storage drives (up to four 3.5" or five 2.5")

Key specifications

• Form factor: Tower ATX (supports EATX, ATX, Micro-ATX, Mini-ITX)
• Pre-installed fans: Seven addressable RGB PWM fans (three 140 mm front, three 120 mm rear, one 120 mm under top panel)
• Radiator support: Up to 420 mm front, up to 360 mm rear
• GPU length: up to 34.5 cm
• CPU cooler height: up to 17.7 cm
• PSU length: up to 27 cm
• Drive bays: 4× 3.5" or 5× 2.5"
• Front I/O: 2× USB 2.0, 2× USB 3.2 Gen1 Type-A, 1× USB Type-C
• Side panel: Tempered glass (right side) with hinge and magnetic closure
• Material/colour: Tempered glass/white
• Weight: 10.4 kg

How to use

Place the REV300 on a stable, level surface with sufficient clearance for front and rear airflow. Open the hinged tempered glass side panel to install the 90-degree rotated motherboard and route cables into the top cable compartment. Mount the power supply and storage drives in the designated bays, install graphics cards up to 34.5 cm, and fit CPU coolers up to 17.7 cm. Connect the pre-installed fans to the motherboard or fan controller using the provided PWM and RGB headers and use the front I/O for peripheral connections, including USB Type-C devices.

Recommendations

For optimal cooling, keep the front mesh and pull-out bottom dust filter clean and ensure unobstructed intake airflow. If installing large radiators or multiple storage drives, check component clearances before final assembly.