Silverstone PP06B-PCIE55 PCI-E 8-pin cable

The SilverStone PP06B-PCIE55 is a 0.55 m PCI‑E cable with an 8‑pin connector designed for use with SilverStone modular power supply units (PSUs). It provides a clean, uniform black appearance inside the PC case thanks to individually sleeved wires and full‑length connectors. The cable is compatible with SilverStone modular PSUs released after 2009 and is intended for connecting graphics cards and other PCI‑E devices to the PSU.

Advantages

The PP06B-PCIE55 offers full‑length connectors and individually sleeved black wires for a neater internal appearance and easier cable management. Its design follows SilverStone’s modular connector standard, ensuring compatibility with current and future SilverStone modular PSUs. The 0.55 m length is suitable for typical GPU-to-PSU routing and provides reliable electrical connection for PCI‑E devices.

Suitable for

• Connecting PCI‑E graphics cards to SilverStone modular PSUs
• Custom PC builds where internal cable appearance and management matter
• Upgrading or replacing existing PCI‑E cables on compatible SilverStone PSUs

Key specifications

• Type: PCI‑E power cable (8‑pin)
• Length: 0.55 m
• Connector: 8‑pin PCI‑E
• Compatibility: SilverStone modular PSUs released after 2009
• Colour: Black, individually sleeved wires
• Manufacturer part number (MPN): SST-PP06B-PCIE55
• EAN: 4710713969414

How to use

Turn off and unplug the PSU before installing the cable. Connect the 8‑pin PCI‑E end to the graphics card or PCI‑E device and the matching modular connector to the SilverStone PSU. Ensure the connectors are fully seated and aligned correctly. After installation, power on the system and verify the device is functioning normally.

Recommendations

Use only with SilverStone modular PSUs that follow the same modular connector standard (models released after 2009). Do not force connectors into incompatible ports. Inspect the cable for damage before use and replace if any insulation or connector damage is found.