Solar accessory EcoFlow WAVE 3 strap – compatible with Wave, black

The EcoFlow WAVE 3 strap in black is an accessory designed to fasten EcoFlow Wave devices and their add-on battery to horizontal surfaces. Developed for solar and Wave-system installations, this strap provides a secure attachment point for mounting, securing or organizing Wave components during transport or operation. The strap is compatible with WAVE 3 and WAVE 2 units and is suitable for environments subject to vibration or movement, such as RVs and yachts.

Advantages

This strap offers a simple, robust solution for securing Wave devices and batteries on flat mounting planes. Its design reduces device movement in bumpy conditions, helping to maintain stable connections and prevent shifting during transit. The strap is compact and unobtrusive, allowing integration into existing installations without significant modifications. Using a wooden board beneath the mounting surface is recommended to distribute load and avoid damage from drilling.

Suitable for

• Securing EcoFlow WAVE 3 and WAVE 2 units on horizontal surfaces
• Fixing add-on Wave batteries in mobile environments (RVs, camper vans, boats)
• Stabilizing Wave components in off-grid solar installations
• Temporary or semi-permanent mounting during transport and storage

Key specifications

• Color: Black
• Compatibility: EcoFlow WAVE 3 and WAVE 2 devices and their add-on battery
• Mounting orientation: Horizontal surfaces
• Intended environments: Mobile and vibration-prone settings (RVs, yachts, camper vans)
• Fixing method: Strap with screw connections for mechanical fastening

How to use

Place the strap over the Wave device or add-on battery on a prepared horizontal mounting plane and align the screw holes with the surface. If the mounting plane is thin or prone to deformation, install a wooden board beneath the device to distribute load and prevent damage from drilling. Fasten the strap using appropriate screws and ensure the strap connections are tightened securely. After installation, check alignment and tighten as needed to eliminate movement.

Recommendations

Regularly inspect screws and strap connections for signs of loosening after use in bumpy or vibrating environments. Use a backing board when mounting on thin surfaces to protect the device and mounting plane. Avoid over-tightening screws to prevent material damage.