Somfy Shutter Inwall Receiver RTS (1811244)

Controlling a roller shutter or awning with a 230V AC tubular motor often means running new control wiring or replacing the motor. The Somfy Shutter Inwall Receiver RTS (1811244) solves this by adding radio control to an existing motor. Installed in a standard flush-mounted box, it receives commands from any Somfy RTS transmitter and switches the motor accordingly.

Who is it for

Electricians and homeowners who want to upgrade a wired shutter or awning to wireless control without changing the motor. It suits installations where a Somfy RTS remote, wall switch, or sensor is already in use or planned.

Main features

• Somfy RTS radio technology at 433.42 MHz
• Controls one 230V AC tubular motor
• Relay output: 3A resistive, 1.7A inductive
• Memorises up to 12 RTS transmitters
• Up, Down, Stop, and My favourite position
• In-wall installation in standard flush box (Ø60mm)
• Operating temperature 0°C to +60°C
• IP20 protection

Specifications

• Power supply: 230V AC / 50Hz
• Radio frequency: 433.42 MHz
• Radio range: up to 20m through 2 concrete walls
• Wiring: 3-wire (Phase, Neutral, Up, Down)
• Compatibility: all Somfy RTS transmitters (Situo, Smoove, Telis, etc.)

Tips

Pair the receiver with a Somfy Situo or Smoove remote for basic control, or add a Telis for timer functions. Mount the receiver in a deep flush box to allow space for wiring. For multiple motors, use one receiver per motor.