Submersible Pump Gardena 9044-61

The Gardena 9044-61 submersible pump is a 750 W electrically powered unit designed for intensive water removal tasks. Capable of pumping up to 20,000 litres per hour, the pump combines a stainless steel housing with a 10 m power cord, providing durability and practical reach for use in basements, wells, ponds and construction sites. The design supports immersion to a depth of up to 7 m and a delivery height of up to 9 m, allowing efficient transfer of large water volumes over moderate vertical distances.

Advantages

The stainless steel housing offers corrosion resistance and mechanical strength for regular use in wet environments. High flow rate performance ensures rapid drainage of flooded areas and fast emptying of tanks or ponds. A 10 m cord increases installation flexibility without additional extension equipment, and the pump’s electrical power rating of 750 W provides a consistent output for continuous operation. The combination of immersion depth and delivery height makes the unit suitable for many standard water removal scenarios.

Suitable for

• Draining flooded cellars and basements
• Emptying garden ponds, pools or water tanks
• Water removal on construction sites and during renovation
• Automatic drainage in temporary installations

Key specifications

• Power input: 750 W
• Maximum flow rate: up to 20,000 litres per hour
• Maximum immersion depth: 7 m
• Maximum delivery (head) height: 9 m
• Housing material: stainless steel
• Power cord length: 10 m

How to use

Place the pump fully submerged in the water to be removed, ensuring the unit sits steadily on a firm surface. Connect the power cord to a properly grounded electrical outlet and switch on according to the manufacturer’s instructions. Monitor the operation and avoid running the pump dry; if water level drops, turn the pump off and reposition if necessary. For lifting water to the desired discharge point, attach a suitable discharge hose to the outlet and secure it to prevent kinking.

Recommendations

Before each use, inspect the pump and cord for visible damage and remove large debris that could obstruct the intake. Use a GARDENA-approved discharge hose matching the outlet diameter to maintain rated flow. For prolonged or frequent operation, allow periodic cooling pauses and follow routine maintenance: clean intake screens and check seals to extend service life.