SYNERGY21 T1 MiLight Smart Panel Single-Colour 4-Zone Touch Remote Control

Control up to four independent single-color LED zones from a single wall-mounted touch panel. The SYNERGY21 T1 Smart Panel is designed for residential and commercial spaces where multiple lighting groups need independent brightness adjustment without reaching for a phone. Install it in a living room to manage ceiling spots, cove lighting, and accent strips separately, or use it in a retail showroom to set different light levels per display area.

Key specifications

• Control type: Capacitive touch wall panel
• Compatibility: MiLight / MiBoxer 2.4GHz RF receivers
• Number of control zones: 4 independent zones
• Controlled LED type: Single color (brightness dimming)
• Wireless technology: 2.4GHz RF
• Wireless control distance: Up to 30 meters (unobstructed)
• Power supply: 2x AAA batteries (3V DC)
• Standby power consumption: < 20µA
• Housing material: Tempered glass panel, PC frame
• Mounting type: Wall-mounted (fits standard EU wall boxes)
• Operating temperature: -20°C to 60°C
• Product colour: White
• Backlight: Yes, for touch interface

Why choose it

The panel replaces multiple handheld remotes with a fixed, always-available controller. Its capacitive touch surface responds without physical buttons, and the 2.4GHz RF signal passes through walls and cabinets, so the panel can be mounted in a convenient location away from the receivers. Four zone buttons let you switch between lighting groups instantly, then adjust brightness with the dimming bar.

Ideal use cases

• Living rooms with multiple single-color LED circuits
• Retail stores needing per-zone brightness control
• Hospitality settings where staff adjust lighting without a phone
• Retrofit projects using existing MiLight 2.4GHz receivers

Good to know

The panel is powered by two AAA batteries, so no wiring to mains is required for operation. It is designed for single-color LED control only; RGB or CCT zones are not supported. The tempered glass front is easy to clean and resists scratches. Installation requires a standard EU wall box, and the panel sits flush against the wall.