Brand: SAM HOLDING
Stock: 12
The SAM side-entry fill valve 1/2" is a classic float valve with a maximum working pressure of 1 MPa.Maximum working pressure: 1 MPaIt fills 6 litres ..
17.67 €
Ex Tax:14.97 €
Brand: SAM HOLDING
Stock: 1
SAM HOLDING cistern flush valve with white push-button start/stop control, for a 60 to 70 mm opening
The SAM cistern flush valve for ceramic cisterns has a white plastic push-button start/stop control and fits a 60 to 70 mm opening.Opening: 60 to 70 m..
30.17 €
Ex Tax:25.56 €
Showing 1 to 2 of 2 (1 Pages)
Kitchen, Dining & Household
Fill valves, flush valves and outlet valves for toilet cisterns
SAM HOLDING replacement parts for toilet cisterns: side-entry and bottom-entry fill valves with 1/2 inch connection, a push-button flush valve and the T-2450 and TE 4549 B outlet valves.
2 productsSAM cistern fittingsVia official distributors
How to choose
Fill valve: side or bottom entry
The fill valve refills the cistern after each flush. A side-entry valve takes the water pipe through the side of the cistern, a bottom-entry valve through the bottom. Pick the same type as the old one.
Connection thread
The fill valves have a 1/2 inch connection with a G 1/2 thread, and one side-entry model fits either a 1/2 or a 3/8 inch connection.
Push-button flush valve
The flush valve has a white push button with start/stop control, so the flush can be stopped early to save water. It fits a cistern opening of 60 to 70 mm.
Outlet valves
The T-2450 and TE 4549 B outlet valves release water from the cistern into the bowl. The TE 4549 B is a single-position, pull-operated version.
What you will find here
Leading brands
SAM
Check before buying: Before ordering, check where the water enters your cistern (side or bottom), the connection size (1/2 or 3/8 inch) and, for the flush valve, the opening size in mm.
Frequently asked questions
How do I know if I need a side-entry or bottom-entry fill valve?
Look at where the water pipe enters the cistern. If it comes in from the side, choose a side-entry valve; if from below, a bottom-entry valve.
Which opening does the push-button flush valve fit?
It is made for a cistern opening of 60 to 70 mm. Measure the opening before buying.
What does start/stop control do?
Pressing the button starts the flush and pressing it again stops it, so you can use less water for a short flush.