Unmanaged Switch Intellinet 562058 Network Switch Black

The Intellinet 562058 is an unmanaged 5‑port desktop network switch with four 2.5G copper Ethernet ports and one SFP+ uplink slot supporting up to 10 Gbps. It supports 10/100/1000/2500 Mbps on the copper ports and accepts standard 1G SFP modules as well as 10G SFP+ optics, making it suitable for home and small office networks that need higher-than-gigabit throughput without configuration complexity.

Advantages

This compact switch eliminates common bottlenecks by providing multi‑gigabit (2.5G) connectivity for Wi‑Fi 6 access points and other high‑bandwidth devices, while the SFP+ uplink allows aggregation to 10 Gbps backbones or direct connections to servers and NAS. As an unmanaged device it requires no configuration, offers plug‑and‑play installation, and the black desktop design fits standard small office environments.

Suitable for

• Connecting Wi‑Fi 6 (802.11ax) access points requiring >1 Gbps
• Small office or home networks needing higher throughput
• Linking servers, NAS or NVRs to a 10G uplink
• Extending a network where simple plug‑and‑play switches are preferred

Key specifications

• Ports: 4 x 2.5GBASE‑T copper, 1 x SFP+ (10G/1G)
• Data rates supported: 10/100/1000/2500 Mbps on copper; 1G/10G on SFP/SFP+
• Switch type: Unmanaged
• Form factor: Desktop, black
• Brand/Model: INTELLINET, MPN 562058, EAN 0766623562058

How to use

Place the switch on a flat surface and connect its power supply. Use standard Ethernet cables to connect devices to the 2.5G copper ports; install a compatible SFP or SFP+ transceiver in the uplink slot if a fiber or 10G connection is required. The switch operates in unmanaged mode so connected devices will negotiate link speeds automatically and traffic will pass without additional configuration.

Recommendations

For optimal performance, connect high‑bandwidth devices such as Wi‑Fi 6 access points, NAS units or servers to the 2.5G ports and use a 10G SFP+ uplink when aggregating traffic to a backbone or high‑speed storage. Use Cat5e or better cabling for 2.5G links and ensure compatible SFP/SFP+ modules are used for the uplink.