VALUE 12.99.3114 HDMI M - VGA F Cable Adapter

The VALUE HDMI M - VGA F cable adapter allows connection of devices with an HDMI output to displays and projectors that accept a VGA (D-Sub 15-pin) input. With a compact construction and a cable length of 0.15 m, the adapter supports analog VGA displays at resolutions up to 1920 x 1080 and is supplied in black finish.

Advantages

This adapter provides interoperability between HDMI-equipped laptops or media players and legacy VGA projectors or monitors without requiring additional drivers. Its small size (approx. 14 x 44 x 44 mm) and lightweight design make it convenient for portable use during presentations. The adapter includes a standard 15-pin HD D-Sub connector to ensure a stable analog connection.

Suitable for

• Connecting laptops with HDMI output to VGA projectors
• Mirroring or extending a notebook screen to VGA monitors
• Presentations in meeting rooms with legacy VGA equipment
• Connecting media players or set-top boxes to VGA displays

Key specifications

• Connector 1: HDMI (male)
• Connector 2: VGA / D-Sub 15-pin (female)
• Maximum resolution: 1920 x 1080
• Cable length: 0.15 m
• Colour: Black
• Brand: VALUE, MPN: 12.99.3114, EAN: 7611990129980

How to use

Connect the HDMI (male) plug of the adapter to the HDMI output of your laptop or source device. Plug a VGA cable from the adapter's VGA (female) connector to the VGA input of the projector or monitor. Set the display mode on the source device to mirrored or extended desktop as required. No driver installation is normally necessary.

Recommendations

For best results use a short, high-quality VGA cable and verify the source device output resolution is set to 1920 x 1080 or lower. This adapter converts digital HDMI signal to analog VGA; it requires an active conversion inside the adapter—ensure the source provides standard HDMI video output. Not suitable for transmitting audio over VGA; audio must be routed separately if required.