VALUE 15m S/FTP Cat.6a Network Cable

The VALUE 15m S/FTP Cat.6a networking cable is a pre-assembled patch cable designed for reliable wired connections between devices. It supports data transfer rates up to 10 Gbit/s and a bandwidth of 500 MHz. The cable uses shielded twisted pair (PiMF / S/FTP) construction with gold-plated RJ-45 connectors on both ends and 1:1 contact wiring in accordance with the EIA/TIA 568 standard. A moulded kink protection ensures durability while the flexible jacket allows for narrow bending and convenient routing.

Advantages

S/FTP shielding with pairs wrapped in aluminium foil plus full braided shielding reduces electromagnetic interference and crosstalk. The 100 Ohm impedance and Cat.6a specification provide stable high-speed transmission up to 10 Gbit/s. Gold-plated RJ-45 contacts improve signal quality and corrosion resistance. The moulded strain relief increases connector longevity and the flexible cable jacket facilitates installation in confined spaces.

Suitable for

• High-speed LAN connections in offices and data closets
• Connecting switches, routers, servers, and workstations
• Structured cabling runs requiring Cat.6a performance over short to medium distances

Key specifications

• Model: VALUE 15m S/FTP Cat.6a
• Length: 15 m
• Category: Cat.6a
• Shielding: S/FTP (pairs foil-shielded + overall braid)
• Data rate: up to 10 Gbit/s
• Bandwidth: 500 MHz
• Impedance: 100 Ohm
• Connectors: RJ-45 gold-plated, 1:1 EIA/TIA 568 wiring
• Color: white
• Brand: VALUE
• Manufacturer code (MPN): 21.99.1978
• EAN: 7611990124305

How to use

Plug one RJ-45 connector into the network port of a switch, router or device and the other end into the corresponding port of the remote device. Ensure connectors are fully inserted until the latch clicks. Route the cable avoiding sharp edges and excessive bending; the moulded kink protection helps prevent damage near the connector. For optimal performance, keep the cable away from strong sources of electromagnetic interference and avoid running it parallel to power cables for long distances.

Recommendations

Use this VALUE Cat.6a S/FTP patch cable for installations that require stable 10 Gbit/s connections over short to medium distances. Verify connector seating and test the link with appropriate network testers after installation to confirm Cat.6a performance.