VGA Cable e+p HD15/HD15 10m

The e+p HD15/HD15 VGA Cable (10 m) is a 10-metre D-Sub video cable designed to connect VGA-compatible devices such as computers, monitors, projectors and TVs. The cable features 15-pin HD-plugs on both ends and a white molded housing with ferrites at both ends for improved interference suppression and strain relief.

Advantages

The cable includes three coaxial leads for RGB signals and seven AWG28 signal conductors, with selectively shielded coaxial cores for high-frequency signals to ensure stable image transmission. Molded connector housings provide reliable tension relief and long-term mechanical protection.

Suitable for

• Connecting desktop PCs or laptops to VGA monitors
• Linking computers to projectors for presentations
• Connecting VGA-compatible TVs or legacy display equipment

Key specifications

• Cable length: 10 m
• Connectors: 15-pin HD-plug (VGA/D-Sub) – male to male
• Cores: 3 coax leads for RGB, 7 AWG28 signal leads
• Shielding: selectively shielded coaxial cores for HF signals
• Ferrites: ferrite beads at both ends
• Colour: White

How to use

Insert each 15-pin HD-plug into the VGA (D-Sub) port of the source and the display, then tighten the screws on both connectors to secure the connection. Ensure devices are powered off when connecting or disconnecting to avoid signal or hardware issues. Position the cable to avoid sharp bends and excessive tension on the connector housings.

Recommendations

For best signal quality over long runs, avoid routing the cable alongside strong power sources or unshielded network cables. If image artefacts appear, check connector seating and grounding; using both ferrites properly positioned can reduce interference.