Wall mount InLine 23106D for monitors up to 27-inch

The InLine 23106D wall mount is engineered for single monitors up to 27 inches with a maximum load of 15 kg. This one-piece arm mount provides adjustable positioning with tilt, swivel and full rotation to optimise viewing angle while keeping a compact footprint. Compatible with VESA 75x75 and 100x100 mounting patterns, the mount offers a minimum distance to the wall of 8.8 cm and extends to a maximum of 24.8 cm. Finished in black, the design integrates into home and office setups without drawing attention.

Advantages

The one-piece arm construction delivers stable support and straightforward installation for a single display. The mount’s tilt range of -15° to 15°, swivel range of -90° to 90° and 360° rotation enable versatile screen orientation from landscape to portrait. Compact depth options let you position the monitor close to the wall or extend it outward as needed. VESA compatibility and a 15 kg weight capacity cover most 27-inch monitors, while the black finish reduces visual distraction.

Suitable for

Key specifications

How to use

Mount the bracket to a suitable wall surface following the supplied instructions and using appropriate anchors for the wall material. Attach the monitor to the VESA plate using the correct screw sizes for the display, then secure the display to the arm. Adjust tilt, swivel and rotation to achieve the desired viewing angle and tighten any adjustment points so the screen holds position. Confirm that the total weight does not exceed the 15 kg capacity before finalising the installation.

Recommendations

For stable and safe installation, use wall anchors rated for the wall type and weight of the monitor. Periodically check mounting screws and adjustment fittings and retighten if necessary. When rotating to portrait orientation, ensure cable routing allows full movement without strain.