Wireless Remote Control Sony FA-WRAC1M

Wireless Radio Commander

Radio remote flash control for creative lighting ideas

Trigger multiple flash units or multiple camera shutters
Connect the FA-WRC1M to up to 15 wireless receivers (FA-WRR1) for radio wireless flash control of even large lighting setups. Use your existing α flash units such as HVL-F60M, F43M or F32M over a wide range of up to 30m (98.4ft). With flash unit grouping you can expand your lighting in inventive ways. With the multi-terminal connection on radio receivers, you can also trigger multiple simultaneous camera shutters, for boundless creativity.

Creative freedom with minimum equipment

Control multiple flashes for unique looks

Spend less time setting up, and more time capturing great images. After attaching FA-WRC1M to your compatible camera1, attach up to 15 radio receivers to flashes, then quickly and easily pair FA-WRC1M to each receiver. Pair up to 15 receivers within up to 5 groups2 for accurate radio transmissions. Easily control multiple flash units for more creative lighting options.

Reliable and precise control in any setting

Radio signals deliver more detailed, more precise shooting information over a wider shooting area (about 30m / 98.4ft). Signals reach wireless receivers, even in bright light or around obstacles, even when installed behind the camera. Achieve more consistent results without pairing errors.

Convenient remote flash setting confirmation

Remotely adjust flash settings on FA-WRC1M. Easily control complex lighting setups alone or with a small crew. Confirm exposure compensation, flash intensity, etc., or independently adjust receiver settings. Adjust flash strength or use Zoom to change flash angles.
Remotely control multiple shutters

Use remote release function to control multiple cameras

Simultaneously release shutters on multiple cameras using remote shooting function. Use separately sold Multi Terminal cables to connect wireless radio receivers to cameras to accurately and reliably shoot one subject from multiple angles at the same time.

Essential wireless radio system components

Combine these tools for complete wireless radio control

To enjoy wireless flash triggering, you must pair the FA-WRC1M wireless radio commander with at least one wireless radio receiver (FA-WRR1) for a complete wireless radio control system. Add Multi Terminal cables (VMC-MM1) between cameras and receivers to further expand the possibilities of your wireless radio control system with remote and multi-angle shooting.

Sony FAWRC1M.CE7

How to use

Attach the FA-WRAC1M to a compatible camera hot shoe and power on both the commander and each FA-WRR1 receiver connected to flash units or cameras. Pair the commander with each receiver, assigning receivers to desired groups (up to five). Position the receivers on your flash units or connect them to cameras using Multi Terminal cables for simultaneous shutter release. Use the commander controls to trigger flashes, adjust flash output and exposure compensation, and operate remote shutter release as needed.

Recommendations

For stable operation, keep the commander and receivers’ firmware up to date and ensure line-of-sight is not strictly required—radio signals function well around obstacles—but place receivers so their antennas are unobstructed where possible. Use dedicated multi terminal cables when connecting receivers to cameras for synchronized multi-angle shooting.