Wybot C1 Pro Pool Robot cordless design, cleaning robot for private pools

Wybot C1 Pro wireless pool cleaning robot is a cordless robotic cleaner designed for residential pools. It performs automated cleaning cycles to remove debris from the pool floor, walls and waterline, using intelligent navigation and app control to simplify routine pool maintenance.

Advantages

The Wybot C1 Pro combines three powerful motors (total 65 W) and a 25.9 V, 4600 mAh battery that provides up to 120 minutes of operation. Fast recharging (5 A input, full charge in approximately 2.5 hours) and efficient power management extend usable run time. Advanced movement patterns and infrared sensors ensure complete coverage and reliable obstacle avoidance, while strong brushes and exceptional climbing ability remove sediment, algae and various debris from vertical walls. A top-loading, large-capacity 180 µm filter basket simplifies maintenance. Dedicated mobile app control and OTA firmware updates keep operation flexible and up to date.

Suitable for

• Residential pools up to 150 m2 surface area
• Pools up to 4 m depth
• Rectangular, round and irregular-shaped pools
• Routine removal of sand, leaves, hair, dust and small debris

Key specifications

• Manufacturer: Wybot
• Model: C1 Pro
• Max pool area: 150 m2
• Max depth: 4 m
• Device dimensions: 372 × 360 × 240 mm
• Weight: 7.8 kg
• Operating time: 120 min
• Charging time: 2.5 h (5 A input)
• Power: 65 W (total)
• Battery: 25.9 V, 4600 mAh
• Filter fineness: 180 µm
• Flow rate: 115 m3/h
• Movement speed: 11 m/min
• Water resistance: IPX8
• App connection: available
• OTA updates: available

How to use

Place the Wybot C1 Pro into the pool, connect the charger when required and use the WYBOT mobile app to choose a cleaning mode and start an automated cycle. The robot will follow intelligent path patterns (N pattern for walls, Cross pattern for the floor) and use infrared sensors to navigate. After the cycle, lift the robot out, open the top-loading filter basket and empty collected debris. Charge the battery when indicated by the app or after prolonged use.

Recommendations

For best results, remove large objects from the pool before a cleaning cycle, run regular maintenance cycles to avoid excessive buildup, and perform periodic checks of brushes and the filter basket. Ensure the charger is compatible with local mains (100–240 V, 50–60 Hz) and follow the manufacturer's safety instructions.