Account Contact
Your Cart
DPD & FedEx – delivery date on the product page
Need help? Ask our AI

XFP Transceiver Module BlueOptics FXFP13-10-BO 10000 Mbit/s

XFP Transceiver Module BlueOptics FXFP13-10-BO 10000 Mbit/s
XFP Transceiver Module BlueOptics FXFP13-10-BO 10000 Mbit/s
XFP Transceiver Module BlueOptics FXFP13-10-BO 10000 Mbit/s
XFP Transceiver Module BlueOptics FXFP13-10-BO 10000 Mbit/s
XFP Transceiver Module BlueOptics FXFP13-10-BO 10000 Mbit/s
XFP Transceiver Module BlueOptics FXFP13-10-BO 10000 Mbit/s
XFP Transceiver Module BlueOptics FXFP13-10-BO 10000 Mbit/s
60 mo.
XFP Transceiver Module BlueOptics FXFP13-10-BO 10000 Mbit/s
XFP Transceiver Module BlueOptics FXFP13-10-BO 10000 Mbit/s
XFP Transceiver Module BlueOptics FXFP13-10-BO 10000 Mbit/s
XFP Transceiver Module BlueOptics FXFP13-10-BO 10000 Mbit/s
XFP Transceiver Module BlueOptics FXFP13-10-BO 10000 Mbit/s
XFP Transceiver Module BlueOptics FXFP13-10-BO 10000 Mbit/s
XFP Transceiver Module BlueOptics FXFP13-10-BO 10000 Mbit/s
116.24 €
PDF
PDF
Stock 10 Code 1474022 Model FXFP13-10-BO Warranty 5 Years

Shipping & Returns

Estimated delivery Wednesday, 02 December
You will be kept updated through our detailed tracking system
Payment options
Bank CardVisaMastercardPayPalApple PayGoogle PayBank Transfer

Ask a question – the AI assistant answers instantly.

Description

The BlueOptics FXFP13-10-BO is an XFP transceiver module designed for high-speed single‑mode fiber networks. It supports a maximum data transfer rate of 10000 Mbit/s and uses an LC duplex optical interface according to MSA XFP form‑factor standards. The module is lightweight (approximately 4 g) and intended for installation in compatible XFP slots of switches, routers, storage systems and similar network hardware that support 10GBASE‑LR XFP modules.

Advantages

The module provides 10 Gbit/s optical transmission over single‑mode fiber with separate transmit and receive wavelengths configured for long‑reach links. It follows MSA specifications for XFP form factor and LC duplex connectivity to ensure mechanical and electrical compatibility with compliant network equipment. Digital diagnostics (DDM/DOM) support is available when the host hardware implements the required interface, enabling monitoring of parameters such as supply voltage, laser bias current, optical output and input power, and temperature. The compact, low‑weight design simplifies installation and replacement in dense network deployments.

Suitable for (tasks / use cases)

Key specifications

How to use

Install the BlueOptics FXFP13-10-BO into a compatible XFP slot following the host device manufacturer’s installation instructions and safety guidelines. Connect LC duplex single‑mode fiber patch cords, observing correct TX/RX orientation and using appropriate patch panels or direct cabling between transceivers. Ensure the connected equipment is configured for 10G operation and that any required firmware or software settings for third‑party transceivers are applied. If digital diagnostics are needed, confirm that the host device supports DDM/DOM and use its management interface to monitor operational parameters.

Recommendations

Use high‑quality single‑mode fiber and LC duplex patch cords to achieve the specified range and signal quality. Verify compatibility with the host hardware and, if possible, perform a test installation to confirm link operation before large‑scale deployment. Observe electrostatic discharge (ESD) precautions during handling and keep optical connectors clean to maintain optimal performance.

Key Highlights
  • 10 Gbit/s Ethernet links over single‑mode fiber
  • Interconnecting switches, routers and storage systems within campus or service provider networks
  • Long‑reach fiber connections up to typical 10 km ranges when used with compatible optics and cabling
  • Environments where DDM/DOM monitoring is required for remote diagnostics
  • Interface type: XFP form factor with LC duplex optical connector
  • Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
  • Fiber type: single‑mode fiber (SMF) compatible
  • Optical wavelengths: separate transmitter and receiver wavelengths for 10GBASE‑LR operation (typical long‑reach configuration)
  • Diagnostics: digital diagnostics (DDM/DOM) support when host hardware provides the interface
  • Weight: 0.004 kg (approx. 4 g)

Specifications

Specifications
Interface type
XFP
Maximum data transfer rate
10000 Mbit/s
Package weight
5 g
Quantity per pack
1 pc(s)
SFP transceiver type
Fiber optic
Weight
0.004 kg

Leaflet

Open Leaflet

Document

Open Document
Price history over the last 6 months
XFP Transceiver Module BlueOptics FXFP13-10-BO 10000 Mbit/s
Current
116.24 €
Lowest 7d
115.05 €
Highest 7d
116.24 €
Change 24H
0.00 €   0%
Change 7D
+1.19 €   +1%
Change 30D
0.00 €   0%

Write a review

Rating *
Note: HTML is not translated!

More BLUEOPTICS products in this category

12

Popular products in this category

8
Seller: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Lithuania · Company code 303192950 · VAT number LT100008198612 · Ships from the EU (Lithuania)
WhatsApp
Messenger
Hi, I’m DistriNode’s AI assistant. I can help you find products, compare options, create quote PDFs, or open support requests.
All categories