Zebra SG-TC7X-HLSTR1-02 Barcode Reader Accessory Case

The Zebra CBA-R07-S07PAR is a barcode reader accessory with a 2 meter (7 ft) straight RS232 cable terminated with a DB9 female connector. Designed for use with Zebra LI3608 and LI3678 scanners, this cable provides a wired serial connection (TXD on pin 2) and requires a separate 12V power supply for operation. It is intended to ensure reliable data transfer between compatible scanners and host devices in retail, warehousing and industrial environments.

Advantages

This RS232 cable offers a standard DB9 female interface and a 2 m length that balances reach and flexibility. Compatibility with LI3608 and LI3678 models allows seamless integration with existing Zebra handheld scanners. The straight TXD wiring on pin 2 follows conventional serial pinouts, enabling straightforward connection to serial ports and legacy equipment when used with the required 12V power source.

Suitable for

• Connecting Zebra LI3608 and LI3678 scanners to serial host devices
• Environments requiring a wired RS232 serial connection (retail POS, warehouses, manufacturing)
• Integration with legacy systems and serial terminals that use DB9 ports

Key specifications

• Connector: RS232 DB9 female
• Cable length: 2 m (7 ft)
• Wiring: TXD on pin 2 (straight)
• Power: Requires external 12V power supply
• Compatible models: Zebra LI3608, LI3678
• Manufacturer part number (MPN): CBA-R07-S07PAR
• EAN: 5711783400363

How to use

Connect the DB9 female end of the Zebra CBA-R07-S07PAR cable to the serial port of the host device and attach the cable to the compatible Zebra scanner model. Ensure the external 12V power supply is connected and powered before initiating data transmission. Configure the host serial port settings (baud rate, parity, stop bits) to match the scanner’s serial settings for proper communication.

Recommendations

Use the cable in dry, indoor environments or protected locations; avoid exposing the connector to moisture or excessive mechanical stress. Verify compatibility with your host device’s serial port and provide the specified 12V power source to ensure stable operation.