helos LC multimode patch cable 1.5 m — duplex fibre optic cable, LC connector

helos Patch Cable LC Multi‑Mode 1.5 m is a duplex fiber optic patch cord with LC connectors designed for short‑reach multimode network links. At 1.5 meters length it connects transceivers, switches and patch panels in data centers, server rooms and LAN installations. The cable provides low insertion loss and reliable multimode signal transmission with compact LC termination suitable for high‑density racks.

Advantages

This duplex fiber cable uses LC connectors to minimise connector footprint and enable high‑density port deployment. The multimode fibre construction supports short‑range data links with stable attenuation and low bit‑error contribution. The 1.5 m length reduces excess slack in rack environments and simplifies cable management. Durable connector boots and strain relief increase mechanical reliability during installation and maintenance.

Suitable for

• Interconnecting transceivers in switches and servers in data centres
• Patch panel to switch or server connections in LAN racks
• Short‑reach multimode links such as within server rooms and telecom closets
• High‑density fibre installations where LC duplex connectors are required

Key specifications

• Cable type: duplex multimode fibre
• Connector type: LC duplex on both ends
• Length: 1.5 m
• Usage: short‑reach multimode network links
• Typical characteristics: low insertion loss, compact termination, strain relief boots

How to use

Route the patch cable between the two intended ports ensuring the LC connectors align with the transceiver or port keying. Insert connectors until the latch clicks to secure the connection. Avoid tight bends near the connector and maintain the minimum bend radius specified by multimode fibre best practices. When removing the cable, press the LC latch and pull gently on the boot to avoid stressing the fibre.

Recommendations

For reliable performance, keep connectors clean using appropriate fibre cleaning tools before insertion and store unused connectors with protective caps. Use the 1.5 m length for tidy rack runs; if routing requires additional slack management, secure the cable with cable ties or Velcro straps without compressing the fibre. Prefer this cable for OMx multimode short‑reach applications and verify connector polish type and transceiver compatibility before deployment.