helos LC Multimode Patch Cable 15m – Fibre Optic Network Cable, Duplex LC Connector

helos Patch cable LC Multi-Mode 15 m is a duplex fiber optic patch cord with LC connectors designed for multimode fiber links in local networks and data centers. At 15 meters length it provides a ready-made connection between networking devices such as switches, patch panels and transceivers, supporting short- to medium-range high-speed links with low insertion loss and stable optical performance. The cable is intended for indoor use in structured cabling and patching applications where multimode transmission is required.

Advantages

The patch cable offers standardized duplex LC terminations that ensure compact connector size and reliable mating with LC ports. Multi-mode fiber construction reduces modal dispersion over short distances and facilitates cost-effective multimode links. A 15 m length balances reach and manageability in racks and wiring closets, while factory-polished connectors and controlled attenuation provide consistent signal quality and plug-and-play installation without the need for field termination.

Key specifications

• Connector type: Duplex LC — LC
• Fiber type: Multimode fiber
• Length: 15 m
• Polish/type: Factory-polished connectors for low insertion loss
• Configuration: Duplex patch cord for bidirectional connections
• Typical application: Indoor structured cabling and data center patching

How to use

Install the helos LC multimode patch cable by inserting each LC connector into the corresponding LC port on network equipment or patch panels, ensuring correct polarity for duplex links. Route the cable through cable management paths to avoid sharp bends and mechanical stress; maintain minimum bend radius recommended for multimode fiber. Test the link with appropriate optical test equipment after installation to verify insertion loss and continuity.

Recommendations

Use the cable indoors only and avoid exposure to direct sunlight or extreme mechanical stress. Keep connector endfaces clean and covered with dust caps when not in use; clean endfaces with proper fiber cleaning tools before mating. For best performance in data center environments, follow vendor guidelines for fiber type matching, polarity and cable management to minimise loss and reflections.