Microconnect UTP630 Network Cable Grey 30 m Cat6 U/UTP (UTP)

The Microconnect UTP630 RJ-45 Cat6 30 m grey networking cable provides a reliable wired connection between network devices such as switches, modems, routers or to structured infrastructure via patch panels, keystone jacks or wall outlets. This U/UTP Cat6 cable supports testing up to 250 MHz and is backwards compatible with Cat5e and Cat5. It is equipped with RJ-45 connectors on both ends and a protective boot (snaggle) to reduce strain and protect the connector during installation in tight spaces. The 30 m length and grey colour make it suitable for home and small office installations and entertainment setups.

Advantages

The cable offers Cat6 performance with support up to 250 MHz and high data rates (up to 10000 Mbit/s as specified), reduced interference thanks to U/UTP construction, and RJ-45 terminations on both ends for plug-and-play use. The integrated boot protects the connector tab during routing and installation. Backwards compatibility with Cat5e and Cat5 allows use with existing cabling and equipment.

Suitable for

• Connecting switches, routers and modems to patch panels or wall outlets
• Home and small office wired Ethernet networks
• High-speed internet and multimedia streaming setups
• Temporary or permanent cabling runs up to 30 m

Key specifications

• Standard: Cat6 (tested up to 250 MHz)
• Length: 30 m
• Connectors: RJ-45 to RJ-45
• Shielding: U/UTP
• Maximum data rate: up to 10000 Mbit/s (manufacturer specification)
• Colour: Grey
• Weight: 0.788 kg
• Brand / MPN: MicroConnect UTP630

How to use

Route the cable between devices or from a device to a wall outlet or patch panel and insert the RJ-45 connectors into the corresponding Ethernet ports until the latch clicks. Use the protective boot to prevent damage when pulling the cable through conduits or tight openings. Avoid sharp bends and maintain recommended bend radius to preserve signal integrity. For permanent installations, secure the cable with appropriate clips or cable ties, leaving some slack to avoid tension on connectors.

Recommendations

For optimal performance, keep cable runs within the 30 m length, avoid running parallel and close to high-voltage power lines, and test connections after installation. Use compatible Cat6-compliant equipment to achieve the specified data rates and ensure backwards compatibility when connecting to Cat5e/Cat5 infrastructure.