Network cable EFB Elektronik MK6001W.0,5G

The EFB Elektronik MK6001W.0,5G is a 0.5 m Cat6A S/FTP networking cable designed for 10 Gigabit Ethernet. It provides shielded transmission to minimise interference and features gold-plated RJ-45 connectors for reliable contact and low signal loss. One connector is moulded at a 90° angle and the slim moulded grommet simplifies insertion in confined spaces, making the cable suitable for high-speed, space-constrained installations.

Advantages

Shielded S/FTP construction reduces electromagnetic interference and crosstalk, supporting stable 10GBase-T performance. Gold-plated RJ-45 contacts improve connectivity and reduce corrosion. The slim moulded grommet and one 90° angled connector facilitate routing and plugging in tight panels or behind devices. The 0.5 m length is suitable for short patch connections where minimal slack is required.

Suitable for

• 10 Gigabit Ethernet (10GBase-T) short patch connections
• Rack and patch panel connections in tight installations
• Workstations, switches and network devices with limited cable clearance

Key specifications

• Brand: EFB Elektronik
• Model / MPN: MK6001W.0
• EAN: 4049759266073
• Cable length: 0.5 m
• Category: Cat6A (S/FTP)
• Rated speed: up to 10000 Mbit/s (10G)
• Connectors: RJ-45 to RJ-45, gold-plated; one connector angled 90°
• Colour: White
• Cabling technology: 10GBase-T

How to use

Connect the straight or 90° RJ-45 plug to the corresponding Ethernet port on your network device and patch panel. Route the cable using the slim moulded grommet to ease insertion in confined spaces, avoiding sharp bends near the connector. Ensure both ends are fully seated until the latch clicks to secure the connection.

Recommendations

Use this 0.5 m Cat6A S/FTP patch cable for short, high-speed links where shielding and a compact connector profile are required. Avoid excessive bending and keep the cable away from strong sources of electromagnetic interference to maintain optimal 10G performance.