Network Switch EXSYS EX-6100POE Gigabit Ethernet Power over Ethernet

The EXSYS EX-6100POE Gigabit Ethernet Power over Ethernet injector adds PoE power to a 4-port Ethernet output so you can deliver power and data over a single Ethernet cable to field devices. Compliant with IEEE 802.3af, the unit injects 48–57 V DC and functions as Power Source Equipment (PSE), enabling installation of devices such as wireless access points, IP cameras and VoIP phones up to 100 meters from the injector. Its compact grey-and-black housing and five RJ-45 Gigabit ports (one uplink plus four PoE ports) make the EX-6100POE suitable where a nearby power outlet is not available.

Advantages

The EX-6100POE provides IEEE 802.3af-compatible PoE power across existing Cat5/Cat6 cabling, combining data and 48–57 V DC power delivery over a single cable. Its small form factor and low weight (0.3 kg) simplify mounting in ceilings, utility poles or confined spaces. With five Gigabit Ethernet ports and straightforward PSE operation, the injector offers a reliable, standards-based method to power remote Ethernet devices without adding local power supplies.

Suitable for

• Installing wireless access points in ceilings or outdoors where no AC outlet exists
• Powering IP surveillance cameras up to 100 m from the power source
• Supplying VoIP phones and other IEEE 802.3af PDs in offices or distributed sites
• Small network segments that require Gigabit data with PoE on multiple ports

Key specifications

• Model: EXSYS EX-6100POE (MPN: EX-6100POE, EAN: 4718359061004)
• Ports: 5 × RJ-45 Gigabit Ethernet (10/100/1000) — typically 1 uplink + 4 PoE ports
• PoE standard: IEEE 802.3af
• Output voltage for PDs: 48–57 V DC
• 10G support: No
• Weight: 0.3 kg
• Colour: Grey, Black

How to use

Connect the injector's uplink RJ-45 port to your network switch or router and connect PoE-capable devices to the PoE RJ-45 ports using standard Ethernet cables. Provide DC input power (48–57 V) to the injector according to the product's power input requirements. The unit will act as the PSE and supply power and data to connected IEEE 802.3af Powered Devices up to 100 metres away over twisted-pair cabling. Mount the device in a dry, ventilated location and route cables to avoid sharp bends or mechanical stress.

Recommendations

Verify that connected devices are IEEE 802.3af-compliant and that total PoE power draw does not exceed the injector's available power budget. Use quality Cat5e or Cat6 cabling for reliable Gigabit data and PoE delivery and maintain cable runs within the 100 m standard limit.