Philips FC5005/01 Replacement Kit

Original filter replacements from Philips. Replacement kit compatible with Philips SpeedPro Max, 7000 and 8000 Series. The kit contains a washable foam filter and an inlay filter with frame; replacement is recommended once a year to maintain performance for stick vacuum cleaners.

Advantages

The accessory kit Philips FC5005/01 contains a foam rubber filter and an inlay filter with frame designed for easy installation and cleaning. The washable foam filter reduces maintenance cost by allowing reuse after washing, while the inlay filter supports consistent filtration and suction performance for stick vacuum models. The kit is supplied in black and matches the original Philips filter specifications.

Suitable for

• Philips SpeedPro Max stick vacuums
• Philips 7000 Series stick vacuums
• Philips 8000 Series stick vacuums

Key specifications

• Brand: Philips
• Manufacturer part number (MPN): FC5005/01
• Suitable for vacuum type: Stick vacuum
• Contents: Washable foam filter and inlay filter with frame
• Colour: Black

How to use

Turn off and unplug the vacuum cleaner (or remove the battery) before removing the filter compartment. Take out the old filters and insert the inlay filter with its frame in the correct position according to the vacuum’s filter housing. Fit the washable foam filter over or into the designated slot as shown in the vacuum manual. Reassemble the filter compartment and ensure it is correctly seated before using the vacuum again.

Recommendations

Replace the inlay filter and frame once a year or sooner if visibly damaged; rinse the foam filter with lukewarm water, allow it to dry completely (at least 24 hours) before reinstalling. Do not use detergents or heat sources for drying.