Power Cable Bachmann 346.112 Black Blue 3 m IEC 309 C19

The Bachmann 346.112 power cable is a 3 meter electrical connection cable designed for industrial and professional use. It pairs an IEC 309 connector with an IEC C19 coupler and is rated for 16 A input current. The cable's black and blue jacket and robust construction provide reliable electrical continuity and mechanical resilience in demanding environments where secure power distribution is required.

Advantages

This power cable combines standardized connectors to ensure compatibility with compatible IEC 309 sockets and C19 inlets while supporting up to 16 A of current. The 3 m length offers flexibility for equipment placement without excessive slack. The durable outer jacket resists wear and mechanical stress, and the cable’s construction promotes consistent conductivity and safety under typical industrial load conditions.

Suitable for

• Connecting servers, rack-mounted equipment and power distribution units (PDUs) in data centers
• Powering industrial machines and control cabinets that accept IEC 309 and C19 connections
• Temporary and permanent installations in workshops or technical rooms requiring a 3 m reach

Key specifications

• Cable length: 3 meters
• Connector types: IEC 309 to IEC C19 coupler
• Rated input current: 16 A
• Color: black and blue jacket
• Application environment: industrial and professional use

How to use

Verify that the equipment and socket ratings match the cable’s 16 A capacity before connecting. Align and insert the IEC 309 plug into the corresponding socket and connect the IEC C19 coupler to the device inlet until a secure fit is achieved. Route the cable to avoid sharp bends, pinch points and exposure to heat sources. For installations in electrical panels or rack environments, ensure connectors are fully seated and strain relief is provided to prevent mechanical stress on terminations.

Recommendations

Use the cable only within its rated current and intended environmental conditions; periodically inspect the jacket and connectors for damage and replace the cable if any insulation breach or connector deformation is found. For permanent or critical installations, secure the cable with appropriate clamps and maintain clear access to connectors for safe disconnection.