Tecline 10 m Cat.6 Network Cable Red

The Tecline 10m Cat.6 networking cable in red is a 10-metre Ethernet cable designed for reliable wired connections in home and office networks. It features U/UTP construction and RJ-45 connectors on both ends, delivering performance suitable for Gigabit Ethernet and standard network applications. The bright red jacket provides easy visual identification in cable runs and patch panels while maintaining flexibility for routing and installation.

Advantages

This Cat.6 cable supports data transfer speeds up to 1 Gbps and is built with twisted-pair conductors and U/UTP shielding to minimise interference on typical LAN environments. The moulded RJ-45 plugs ensure stable connector seating and simplified plug-and-play installation. Its 10 m length covers common distances between network devices without the need for additional extensions.

Suitable for

• Connecting desktop PCs, laptops, and network printers to a switch or router
• Wired connections for VoIP phones and conferencing equipment
• Home and small office network cabling, including structured patching
• Temporary or permanent connections where cable visibility aids identification

Key specifications

• Cable category: Cat.6
• Length: 10 metres
• Shielding: U/UTP (unshielded overall, twisted pairs)
• Connectors: RJ-45 on both ends
• Maximum supported speed: up to 1 Gbps (Gigabit Ethernet)
• Colour: red
• Conductor type: twisted pair copper

How to use

Plug one RJ-45 connector into the Ethernet port of your source device (router, switch or modem) and the other connector into the target device (PC, NAS, printer or IP phone). Ensure connectors click into place for a secure connection. Route the cable to avoid sharp bends and places with heavy foot traffic; secure with cable ties or clips if necessary. For best results, keep the cable away from strong electromagnetic sources and high-voltage power lines.

Recommendations

Use the cable for Gigabit Ethernet links within the specified 10 m span and replace if the outer jacket or connectors show visible damage. For environments with high electromagnetic interference or where greater shielding is required, consider using shielded or higher-category cabling.